Download 1. Remove the mirror mount cover. Take care not to scratch the door panel. 2. Remove the inner handle (A). Take care not to scratch the door panel. 1. Pry out the cap (B), and remove the screw (C). 2. Pull the inner handle forward and out half-way. 3. Disconnect the inner handle rod (D) from the joint bushing (E), and power doorlock switch connector (F). For some models: On driver’s side, disconnect the driving position memory switch connector (G). NOTE: Check the bushing for damage, and replace if necessary. 3. Detach the clips (A) and hocks (B), then remove the speaker grille (C). Remove the screws (D). 4. Detach the clips (A) and release the hooks (B), then remove the switch panel (C). Take care not to scratch the door panel. Disconnect the power window switch (door multiplex control unit) connectors (D). On driver’s side, disconnect the power mirror switch connector (E). 5. Pry out the cap (F), and remove the screw (G). 6. Release the clips that hold the door panel (A) with a commercially available trim pad remover (B), then remove the door panel by pulling it upward. Disconnect the speaker connector (C). On driver’s side, disconnect the front door subharness connector (D). On passenger’s side, disconnect the courtesy light bulb socket (E), and detach the harness clip (F) from the panel. Remove the door panel with as little bending as possible to avoid creasing or breaking it.